- Very rapid cure. Ready to grind in under 1 hour.
- Zero VOC’s
- Easy to mix, no critical mix ratio between powder and liquid activator.
- Superior bond strength to concrete.
TF Flat Finish is a rapid curing, very fine concrete repair slurry, designed for use on shallow surface damage of concrete substrates. TF Flat Finish was created as a rapid repair slurry, for preparation of concrete surfaces, before application of a decorative coating. TF Flat Finish is applied as a scratch coat to fill in any surface scaling, spalling or imperfections.
With its extremely fast curing properties, TF Flat Finish will be ready for grinding in as little as 45 minutes, allowing the top coating to be applied in the same day. TF Flat Finish can be applied horizontally, vertically or overhead, and is intended for thicknesses between a feather-edge to approximately 1⁄4”. This product can go thicker, but is not designed as a structural material. Please refer to the datasheet for proper surface preparation and product use.